Petroleum Science >2012, Issue 4: 521-526 DOI: https://doi.org/10.1007/s12182-012-0237-2
Hydraulic model optimization ofa multi-product pipeline Open Access
文章信息
作者：Liang Yongtu,Li Ming and Li Jiangfei1
作者单位：
School of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China;2 Sinopec Engineering Corporation, Beijing 100101, China;1 School of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
投稿时间：2012-02-07
引用方式：Liang, Y., Li, M. & Li, J. Pet. Sci. (2012) 9: 521. https://doi.org/10.1007/s12182-012-0237-2
文章摘要
An optimization model is established for a multi-product pipeline which has a known delivery
demand and operation plan for each off-take station. The aim of this optimization model is to minimize
the total pumping operation cost, considering not only factors including the energy equilibrium constraint,
the maximum and minimum suction and discharge pressures constraints of pump stations, and pressure
constraint at special elevation points, but also the regional differences in electricity prices along the
pipeline. The dynamic programming method is applied to solve the model and to find the optimal pump
configuration.
demand and operation plan for each off-take station. The aim of this optimization model is to minimize
the total pumping operation cost, considering not only factors including the energy equilibrium constraint,
the maximum and minimum suction and discharge pressures constraints of pump stations, and pressure
constraint at special elevation points, but also the regional differences in electricity prices along the
pipeline. The dynamic programming method is applied to solve the model and to find the optimal pump
configuration.
关键词
-
Multi-product pipeline, pump sets, regional electricity price, optimization, dynamicprogramming