Petroleum Science >2022, lssue 2: - DOI: https://doi.org/10.1016/j.petsci.2021.10.027
Probing the effect of Young's modulus on the plugging performance of micro-nano-scale dispersed particle gels Open Access
文章信息
作者：Zhi-Xuan Zhu, Lin Li, Jia-Wei Liu, Jia Chen, Zhong-Zheng Xu, Yi-Ning Wu, Cai-Li Dai,
作者单位：
投稿时间：
引用方式：Zhi-Xuan Zhu, Lin Li, Jia-Wei Liu, Jia Chen, Zhong-Zheng Xu, Yi-Ning Wu, Cai-Li Dai, Probing the effect of Young's modulus on the plugging performance of micro-nano-scale dispersed particle gels, Petroleum Science, Volume 19, Issue 2, 2022, Pages 688-696,
文章摘要
Abstract
The effect of mechanical strength of the dispersed particle gel (DPG) on its macro plugging performance is significant, however, little study has been reported. In this paper, DPG particles with different mechanical strengths were obtained by mechanical shearing of bulk gels prepared with different formula. Young's moduli of DPG particles on the micro and nano scales were measured by atomic force microscope for the first time. The mapping relationship among the formula of bulk gel, the Young's moduli of the DPG particles and the final plugging performance were established. The results showed that when the Young's moduli of the DPG particles increased from 82 to 328 Pa, the plugging rate increased significantly from 91.46% to 97.10% due to the distinctly enhanced stacking density and strength at this range. While when the Young's moduli of the DPG particles surpassed 328 Pa, the further increase of plugging rate with the Young's moduli of the DPG particles became insignificant. These results indicated that the improvement of plugging rate was more efficient by adjusting the Young's moduli of the DPG particles within certain ranges, providing guidance for improving the macroscopic application properties of DPG systems in reservoir heterogeneity regulation.
The effect of mechanical strength of the dispersed particle gel (DPG) on its macro plugging performance is significant, however, little study has been reported. In this paper, DPG particles with different mechanical strengths were obtained by mechanical shearing of bulk gels prepared with different formula. Young's moduli of DPG particles on the micro and nano scales were measured by atomic force microscope for the first time. The mapping relationship among the formula of bulk gel, the Young's moduli of the DPG particles and the final plugging performance were established. The results showed that when the Young's moduli of the DPG particles increased from 82 to 328 Pa, the plugging rate increased significantly from 91.46% to 97.10% due to the distinctly enhanced stacking density and strength at this range. While when the Young's moduli of the DPG particles surpassed 328 Pa, the further increase of plugging rate with the Young's moduli of the DPG particles became insignificant. These results indicated that the improvement of plugging rate was more efficient by adjusting the Young's moduli of the DPG particles within certain ranges, providing guidance for improving the macroscopic application properties of DPG systems in reservoir heterogeneity regulation.
关键词
-
Dispersed particle gel; Mechanical strength; Young's modulus; Atomic force microscope; Plugging performance