Petroleum Science >2023, Issue 5: - DOI: https://doi.org/10.1016/j.petsci.2023.04.005
Preparation of a functional fracturing fluid with temperature- and salt-resistance, and low damage using a double crosslinking network Open Access
文章信息
作者:Yang Zhang, An Chen, Jin-Cheng Mao, Song-Hai Qin, Jin Li, Xiao-Jiang Yang, Chong Lin, Zhi-Yu Huang, Ya-Fei Liu
作者单位:
投稿时间:
引用方式:Yang Zhang, An Chen, Jin-Cheng Mao, Song-Hai Qin, Jin Li, Xiao-Jiang Yang, Chong Lin, Zhi-Yu Huang, Ya-Fei Liu, Preparation of a functional fracturing fluid with temperature- and salt-resistance, and low damage using a double crosslinking network, Petroleum Science, Volume 20, Issue 5, 2023, Pages 3223-3230, https://doi.org/10.1016/j.petsci.2023.04.005.
文章摘要
Abstract: Fracturing fluids (FFs) have been widely used to stimulate the tight reservoir. However, current FFs will not only lose their rheological property at high temperatures and high salt but also show an incomplete gel-breaking property. Herein, a double crosslinking network FF with pretty superiorities in rheology and low damage to the core was constructed by introducing both physical crosslinking and chemical crosslinking into the system. The construction of double crosslinking networks enhanced the rheology of this functional FF. The particle sizes of gel-breaking fluids are mainly distributed in 1.0–10,000 nm; furthermore, for every 10,000 mg/L increase in salinity, the particle size of the gel-breaking fluid is decreased by almost half. The adsorption capacity (<1.0 mg/g) gradually decreased with the increase of salinity at 20 °C. Moreover, the adsorption of gel-breaking fluids on the rock decreased first and then kept stable with temperature increasing at a salinity of ≤30,000 mg/L, however, showed the opposite trend at 40,000 mg/L. The results of rheology, particle size, static adsorption, and core damage showed that this functional FF could be an alternative for the stimulation of a tight reservoir with high temperature and recycling of produced water with high salinity.
关键词
-
Keywords: Fracturing fluid; Temperature- and salt-resistance; Particle size; Static adsorption; Low damage